Skip to content
EvaForm

Custom EVA Foam Packaging Case Studies

Five representative projects showing how we move from a product to a validated insert. Figures are representative of the project class; contact us for a detailed reference on your own application.

Case 1 — Electronics brand: device plus accessory kit

Electronics kit insert
ItemDetail
ProblemDevice, charger, cable and manual shipped loose; 4.1% transit damage claim rate
SpecificationCNC-routed insert, 60 kg/m³ EVA, dissipative grade, six cavities
ProcessCNC routing, ±0.5 mm, laser-engraved accessory labels
ResultDamage claims below 0.6%; kit completeness audited at packing

Case 2 — Winery: single-bottle shipper

Wine shipper insert
ItemDetail
ProblemBreakage of 2.3% on parcel carrier; closures damaged
SpecificationBase and neck support, 150 kg/m³ EVA, two-tone, adhesive-backed
ProcessDie cutting + lamination, ISTA 1A drop test
ResultBreakage below 0.4%; closure damage eliminated by raising the land

Case 3 — Cosmetics: seasonal gift set

Cosmetic gift set insert
ItemDetail
ProblemBottles rattled and scuffed in a printed gift box
SpecificationFlocked two-tone insert, 90 kg/m³ EVA, Pantone-matched, finger notch
ProcessLamination + die cutting, flocking
ResultZero scuff returns; perceived quality feedback improved at retail

Case 4 — Tool distributor: shadow board rollout

Tool control rollout
ItemDetail
ProblemMissing tools and unlabelled van drawers across 40 vehicles
Specification120 kg/m³ two-tone EVA, CNC-routed to drawer size, engraved labels
ProcessCNC routing, laser engraving, adhesive backing
ResultTool audits completed in minutes; repeat orders standardised across the fleet

Case 5 — Medical device: procedure kit tray

Medical kit tray
ItemDetail
ProblemInstruments shifted during sterilisation container cycles
SpecificationLow-shed 80 kg/m³ EVA, CNC-routed, engraved labels, wipe-clean
ProcessCNC routing, laser engraving, material declaration
ResultNo movement after 200 container cycles; documentation accepted by QA
Start a project

Get a quote and a sample for your project

Send us the dimensions, a drawing or the physical part. You will get a written DFM review, a unit price and a sample plan within 12 business hours.

Or email sales@eva-form.com · MOQ from 1 piece · sample in 5–7 days · mass production 15–25 days

Frequently asked questions

Can you share a reference for my industry?
Yes. Tell us your application and we put you in touch with a comparable reference where confidentiality allows.
Can we visit the factory?
Yes, we welcome customer visits to Dongguan and can arrange a full line tour.
Can you work under an NDA?
Yes, we sign an NDA before any design exchange.

Buyer specification checklist

What should I specify for the insert?

The core inputs are product size, weight, cavity depth, density, thickness and tolerance. EvaForm uses these six values to select the EVA grade and cutting route.

Which conversion process fits my part?

Die cutting is the most economical route for high-volume flat inserts. CNC routing suits multi-level cavities; molding fits deep 3D shapes.

What happens after I send a drawing?

You receive a DFM note, price and sample plan within one business day. Include quantity, colour or finish, destination port and target date.

Which standards guide the material choices?

EVA foam packaging is normally specified against ISO 9001 quality control, RoHS/REACH material compliance and UL 94 flammability classifications. These references help buyers compare suppliers on evidence rather than claims.

“Specify density, hardness and tolerance before discussing price; the rest is process selection.” — EvaForm Engineering Checklist