Skip to content
EvaForm
Materials

EVA Foam Sheets & Rolls: Material Data and Supply

We manufacture closed-cell EVA foam sheets and rolls for converters, packaging engineers and OEMs, and cut them in-house to inserts, gaskets, tapes and components. This page gives the density, hardness, thickness and finish options with the test methods behind them.

EvaForm supplies closed-cell EVA foam sheet and roll from 38 kg/m³ to 250 kg/m³ and 1 mm to 100 mm thick, in standard 1 × 2 m sheets or rolls up to 2 m wide. Sheets can be laminated, adhesive-backed, flocked, embossed or supplied as die-cut and CNC-routed parts.

EVA foam density and hardness chart

Closed-cell EVA foam sheet and roll in multiple colours and thicknesses
Closed-cell EVA foam sheet and roll, available from 38 to 250 kg/m³ and 1 to 100 mm thick.

Density (kg/m³) is the mass per unit volume and drives stiffness, compression resistance and cost. Hardness is measured on the Shore C scale and correlates with density, but the two are not interchangeable — a high-density, soft-rebound grade can read lower on Shore C than a brittle grade of the same density. Always specify both.

Standard EVA foam grades we manufacture
GradeDensity (kg/m³)Hardness (Shore C)ReboundBest use
Extra soft38–4525–35MediumCosplay, costumes, craft, low-cost cushioning
Soft50–7035–45GoodLight packaging, toys, display
Medium80–11045–55Very goodGeneral inserts, cosmetic trays, case interiors
Firm120–16055–65Very goodTool control, glassware, wine shippers
Rigid180–25065–80LowerStructural inserts, gaskets, load-bearing parts
ESD dissipative80–12045–55GoodElectronics, PCB and component handling
Flame retardant80–16045–65GoodTransport, construction, electronics enclosures

Thickness, sheet and roll sizes

  • Standard sheet — 1000 × 2000 mm, 1–100 mm thick.
  • Roll — up to 2000 mm wide, 2–10 mm thick typical, 10–50 m per roll.
  • Custom width — slitting to any width from 100 mm.
  • Laminated thickness — build up to 120 mm from multiple layers with contrasting colours.
  • Adhesive backed — pressure-sensitive adhesive with release liner, one or both sides.
  • Tolerance — thickness ±0.3 mm under 10 mm, ±5% above 10 mm.

What closed-cell structure means for performance

In closed-cell EVA the gas cells are fully sealed from each other, so water cannot wick through the material. That gives EVA its waterproof behaviour, its buoyancy, its low compression set and its resistance to mould and odour. It is also why EVA can be used in case interiors and coolers where an open-cell foam would hold moisture.

Thermal and acoustic insulation

Closed-cell EVA has a thermal conductivity of roughly 0.035–0.045 W/m·K, comparable to many dedicated insulation foams, and it damps structure-borne vibration because of its viscoelastic behaviour. It is used as a secondary insulation layer in cases, coolers, vehicle interiors, flooring underlay and equipment housings. It is not a substitute for a certified building insulation product.

Finishes and in-house conversions

  • Smooth skin — standard, non-scuff, easy to clean.
  • Embossed — leather-grain, diamond, or a custom texture.
  • Flocked — short-nap velvet surface for jewellery and cosmetic presentation.
  • Die-cut — steel rule die parts from one piece, with no quantity limit.
  • CNC-routed — multi-level cavities and contoured parts.
  • Water-jet-cut — thick blocks and dense grades without a die.
  • Laser-cut — fine detail on thin sheet.
  • Laminated — multi-layer thickness and two-tone colour.

Full material data table

Typical properties of closed-cell EVA foam (medium grade 100 kg/m³)
PropertyValueTest method
Density100 kg/m³ISO 845
Hardness50 Shore CASTM D2240
Tensile strength≥ 1.2 MPaASTM D3574
Elongation at break≥ 200%ASTM D3574
Compression set (22 h / 70°C)≤ 15%ASTM D3574
Thermal conductivity0.035–0.045 W/m·KASTM C518
Water absorption (24 h)< 1% by volumeASTM D3574
Operating temperature-40°C to +80°CInternal
Flammability (optional)UL94 HB / V-0, FMVSS 302UL 94 / FMVSS 302
Surface resistivity (ESD grade)10^6–10^9 ΩIEC 61340-5-1

For material comparisons, see EVA vs EPE, EVA vs neoprene, EVA vs IXPE and EVA vs XLPE.

Start a project

Get a quote and a sample for your project

Send us the dimensions, a drawing or the physical part. You will get a written DFM review, a unit price and a sample plan within 12 business hours.

Or email sales@eva-form.com · MOQ from 1 piece · sample in 5–7 days · mass production 15–25 days

All 12 products in this category

Every sheet and board grade we hold — plain colour, eco-friendly, high-density, laminated and acoustic — in thicknesses from 0.5 mm to 200 mm.

12 products

38° Coloured EVA Foam Sheet — EVA Foam Sheets & Boards from EvaForm

38° Coloured EVA Foam Sheet

A 38 kg/m³ closed-cell EVA sheet supplied as 1 m x 2 m panels from 1 to 10 mm thick, in black, white and mixed colours.

View product →
38° Eco-Friendly Coloured EVA Foam Sheet — EVA Foam Sheets & Boards from EvaForm

38° Eco-Friendly Coloured EVA Foam Sheet

A multi-purpose 38 kg/m³ EVA sheet with a printable surface and a 0–60 mm thickness range.

View product →
High-Density Anti-Static EVA Foam Sheet — EVA Foam Sheets & Boards from EvaForm

High-Density Anti-Static EVA Foam Sheet

A high-density, anti-static EVA board for electronics packaging and industrial cushioning, made to order in mixed colours and thicknesses up to 100 mm.

View product →
EVA Foam Sheets & Rolls for Crafts and Display — EVA Foam Sheets & Boards from EvaForm

EVA Foam Sheets & Rolls for Crafts and Display

Waterproof, lightweight EVA foam in sheet and roll form for craft, event and display work.

View product →
High-Density EVA Foam Sheet & Roll for Toy Packaging — EVA Foam Sheets & Boards from EvaForm

High-Density EVA Foam Sheet & Roll for Toy Packaging

A firm, black EVA foam in sheet and roll formats for toy components and protective packaging.

View product →
High-Resilience Coloured EVA & PEF Packaging Foam — EVA Foam Sheets & Boards from EvaForm

High-Resilience Coloured EVA & PEF Packaging Foam

A high-rebound EVA/PEF foam supplied in various specifications and colours, chosen where packaging must spring back after compression rather than stay dented.

View product →
Coloured 38° EVA Foam Board, Sheet & Roll — EVA Foam Sheets & Boards from EvaForm

Coloured 38° EVA Foam Board, Sheet & Roll

A high-elastic, multi-purpose coloured EVA foam supplied as board, sheet or continuous roll, with anti-static and flame-retardant options and heat-press forming for cushion pads.

View product →
Coloured Acoustic Wave Foam Panels — EVA Foam Sheets & Boards from EvaForm

Coloured Acoustic Wave Foam Panels

Embossed wave-profile acoustic panels for studios, home theatres and treated rooms, with a standard 25–30 dB grade and a microporous polyurethane core.

View product →
Glue-Free High-Density EVA Foam Board — EVA Foam Sheets & Boards from EvaForm

Glue-Free High-Density EVA Foam Board

A high-density EVA board with no adhesive coating, made for tool case liners, gift box inserts, shock protection and cosplay or scale models.

View product →
White High-Density EVA Foam Blocks & Building Bricks — EVA Foam Sheets & Boards from EvaForm

White High-Density EVA Foam Blocks & Building Bricks

Soft, high-density EVA square blocks in white and mixed colours, cut to any size for children building sets, educational toys and lightweight construction models.

View product →
White EVA Foam Board for COS Props & Models — EVA Foam Sheets & Boards from EvaForm

White EVA Foam Board for COS Props & Models

A clean-cutting white EVA board for cosplay props, scale models and protective packaging, available in 38° and 60° grades with thickness up to 200 mm.

View product →
Black High-Density EVA Foam Sheet — EVA Foam Sheets & Boards from EvaForm

Black High-Density EVA Foam Sheet

A black high-density 38° EVA sheet held in stock for cushion pads, seals, shock absorption and tool box slots, cut to any size and thickness up to 100 mm.

View product →

Frequently asked questions

What is the density of EVA foam?
We manufacture from 38 kg/m³ (extra soft) to 250 kg/m³ (rigid). Packaging inserts most commonly use 60–160 kg/m³.
What thickness of EVA foam sheet is available?
From 1 mm to 100 mm as a single sheet, and up to about 120 mm by laminating layers.
Is EVA foam waterproof?
Yes. The closed-cell structure does not absorb water, with measured absorption below 1% by volume over 24 hours. Cut edges and joints are not sealed, so a watertight assembly needs bonding or welding.
Can you supply EVA foam roll instead of sheet?
Yes, rolls up to 2000 mm wide and 2–10 mm thick are standard; thicker material is supplied as sheet.
Do you offer flame-retardant EVA foam?
Yes, UL94 HB and V-0 grades and FMVSS 302 compliant stock are available on request with certification documentation.
Can EVA foam be used for sound deadening?
It dampens vibration and adds mass, so it helps with structure-borne noise. For airborne acoustic absorption an open-cell foam is more effective — see EVA foam properties.
What should buyers check when specifying EVA foam sheet manufacturer?
For EVA foam sheet manufacturer, confirm density, thickness, tolerance, colour/finish and MOQ before a trial order. EvaForm makes custom EVA foam packaging to drawing or sample, with MOQ 1 piece and samples in 5–7 days.
What should buyers check when specifying EVA foam hardness 38 degree?
For EVA foam hardness 38 degree, confirm density, thickness, tolerance, colour/finish and MOQ before a trial order. EvaForm makes custom EVA foam packaging to drawing or sample, with MOQ 1 piece and samples in 5–7 days.

Buyer specification checklist

What should I specify for the insert?

The core inputs are product size, weight, cavity depth, density, thickness and tolerance. EvaForm uses these six values to select the EVA grade and cutting route.

Which conversion process fits my part?

Die cutting is the most economical route for high-volume flat inserts. CNC routing suits multi-level cavities; molding fits deep 3D shapes.

What happens after I send a drawing?

You receive a DFM note, price and sample plan within one business day. Include quantity, colour or finish, destination port and target date.

Which standards guide the material choices?

EVA foam packaging is normally specified against ISO 9001 quality control, RoHS/REACH material compliance and UL 94 flammability classifications. These references help buyers compare suppliers on evidence rather than claims.

“Specify density, hardness and tolerance before discussing price; the rest is process selection.” — EvaForm Engineering Checklist