Foam Quality Testing, Acceptance Criteria and Reports
We test at four stages: incoming foam stock, first article after setup, in-process during the run, and final AQL sampling. This page lists the methods we use and the acceptance criteria we work to.
Test methods and acceptance
| Property | Method / standard | Frequency | Acceptance |
|---|---|---|---|
| Density | ISO 845 | Incoming + first article | Within ±10% of nominal |
| Thickness | Micrometer, 4-point | Every setup + in-process | ±0.3 mm under 10 mm, ±5% above |
| Hardness | ASTM D2240 (Shore C) | Incoming + first article | ±5 Shore |
| Compression set | ASTM D3574 (22 h / 70°C) | Per lot, on request | ≤ 15% |
| Tensile strength / elongation | ASTM D3574 | Per material lot | Per datasheet |
| Tear strength | ASTM D3574 | Per material lot | Per datasheet |
| Water absorption | ASTM D3574 (24 h) | Per material lot | < 1% by volume |
| Flammability | UL94 HB / V-0, FMVSS 302 | Per certified grade | Certificate supplied |
| Surface resistivity | IEC 61340-5-1 / ASTM D257 | Per ESD lot | Within specified decade range |
| Colour match | Visual against approved chip | First article | Approved chip on file |
| Dimensional | CMM or gauge check | First article + AQL | Within drawing tolerance |
Inspection levels
- First article — full dimensional report before production starts.
- In-process — cavity depth, thickness and colour checks at defined intervals.
- Final — AQL 1.0 for critical dimensions, 2.5 for cosmetic, on a sample of the lot.
- Documentation — first-article report, test certificates and a certificate of conformity on request.
Certifications held
Factory: ISO 9001:2015 quality management system, SGS audited. Materials: RoHS, REACH SVHC, UL94 HB / V-0 and FMVSS 302 grades available with test reports.
Get a quote and a sample for your project
Send us the dimensions, a drawing or the physical part. You will get a written DFM review, a unit price and a sample plan within 12 business hours.
Frequently asked questions
Do you provide a first-article report?
What AQL level do you use?
Can you test ESD resistivity?
Do you test flammability?
Can I get material documentation for a shipment?
Buyer specification checklist
What should I specify for the insert?
The core inputs are product size, weight, cavity depth, density, thickness and tolerance. EvaForm uses these six values to select the EVA grade and cutting route.
Which conversion process fits my part?
Die cutting is the most economical route for high-volume flat inserts. CNC routing suits multi-level cavities; molding fits deep 3D shapes.
What happens after I send a drawing?
You receive a DFM note, price and sample plan within one business day. Include quantity, colour or finish, destination port and target date.
Which standards guide the material choices?
EVA foam packaging is normally specified against ISO 9001 quality control, RoHS/REACH material compliance and UL 94 flammability classifications. These references help buyers compare suppliers on evidence rather than claims.
“Specify density, hardness and tolerance before discussing price; the rest is process selection.” — EvaForm Engineering Checklist
- ISO 9001 — quality management systems (2026 edition published 16 Sep 2026)
- EU REACH — chemical compliance
- RoHS Directive 2011/65/EU — restricted substances
- UL 94 — flammability classification