Custom EVA Foam Inserts, Manufactured to Fit Your Product
We design, prototype and mass-produce made-to-fit EVA foam inserts for packaging, cases, trays and presentation boxes. Send a drawing or the physical product — we return a 3D fit proposal, a sample in 5–7 days, and a unit price within 12 business hours.
EvaForm is a custom EVA foam insert manufacturer with a 4,000 m² factory, 16 cutting and molding lines, and a minimum order of 1 piece with no quantity limit. We produce die-cut, CNC-routed, water-jet-cut and molded EVA foam inserts for packaging, shipping cases, tool boxes, cosmetic sets, electronics and medical devices, shipping worldwide from Dongguan, China.
What is a custom EVA foam insert?
A custom EVA foam insert is a closed-cell ethylene-vinyl acetate (EVA) foam component cut, routed or molded to the exact shape of a product, so the product sits in a formed cavity that holds it against shock, vibration, abrasion and movement in transit. Unlike stock foam, a custom insert is engineered around a specific product, its weight, its fragile points and the box or case that contains it.
The engineering input is a product drawing, a 3D file, a photo with dimensions, or the physical part. From that we decide foam density and thickness, cavity depth and draft angle, wall thickness between cavities, corner radii, and the cutting process that gives the best surface and tolerance for the volume. A prototype sample is produced and fitted before any production run.
Typical insert constructions
- Flat die-cut insert — one or more layers of EVA foam cut to shape, glued and fitted to a box. Lowest tooling cost, available from one piece with no quantity limit.
- CNC-routed insert — multi-level cavities, contoured pockets and raised lands routed from a single block. Best for irregular shapes and premium fit.
- Die-cut + lamination insert — several thinner sheets laminated to reach thickness without a thick-block cost, with contrasting colours between layers.
- Molded / thermoformed insert — heat and pressure formed into 3D shapes, used when a deep draw or a high-gloss surface is required.
- Case insert — fitted to a flight case, aluminium case, EVA soft case or plastic trunk, often combined with a lid egg-crate layer.
- Tray insert — a shallow, repeated-cavity tray for kits, samples, vials, components or retail display.
Why EVA foam is the default insert material
EVA foam combines a soft, non-abrasive contact surface with genuine shock absorption and a closed-cell structure that does not absorb water. It can be cut to fine tolerance, laminated to almost any thickness, coloured through the material, and formulated for flame retardancy or static dissipation. For packaging inserts it outperforms polyethylene, polyurethane and EPE on surface finish, repeatability and per-unit cost at low to medium volumes.
| Material | Rebound / cushioning | Surface finish | Water resistance | Typical use in inserts |
|---|---|---|---|---|
| EVA foam (closed cell) | Excellent | Smooth, matte, non-scuff | Excellent | Primary insert, cavities, trays |
| Polyethylene (PE) foam | Good | Smooth | Excellent | Heavy-duty case inserts, edge protectors |
| Polyurethane (PU) foam | Very soft, good damping | Porous | Poor (open cell) | Cushion pads, convoluted lid foam |
| EPE / pearl foam | Moderate | Slightly textured | Excellent | Low-cost box liners, corners |
| EPS / expanded polystyrene | Brittle, good for rigid parts | Beaded | Good | Molded rigid inserts, coolers |
| Convoluted (egg-crate) foam | Lid cushioning | Textured | Depends on base | Case lids, tops |
Design and prototyping workflow
- 01
Send the product data
Drawing, STEP/IGES, a photo with dimensions, or the physical part. We also accept a boxed product you already sell and reverse-engineer the insert.
- 02
DFM review within 12 business hours
We return a design-for-manufacture note: recommended density, thickness, cavity depth, draft, radii, wall thickness and the most economical process.
- 03
Prototype sample in 5–7 days
A hand-cut or soft-tool sample is produced and photographed fitted to your product. Dimensions and foam hardness can be adjusted before tooling.
- 04
Approval and tooling
On approval we cut the steel rule die or prepare the CNC program and, where needed, a molding tool. Die cost is quoted separately and credited against volume orders.
- 05
Mass production
15–25 days typical lead time depending on quantity and lamination. In-process checks on cavity depth, thickness and colour, with a first-article report on request.
- 06
Inspection and shipping
AQL sampling, then carton or pallet packing to your spec. We quote EXW or FOB to the US, Canada, EU and Australia; the buyer arranges and pays freight.
Which cutting process fits your insert
The process is chosen by geometry, volume and surface requirement, not by preference. Flat, simple shapes at high volume are cheapest on a steel rule die. Complex or multi-level shapes are cheaper on a CNC router because no tooling is needed. Deep 3D forms need molding or thermoforming.
| Process | Best for | Tolerance | Tooling cost | Volume guidance |
|---|---|---|---|---|
| Steel rule die cutting | Flat inserts, simple outlines, large quantities | ±0.3 mm | Low (die) | no minimum |
| CNC routing | Multi-level cavities, prototypes, medium runs | ±0.5 mm | None | 1 pc – no upper limit |
| Water jet cutting | Thick blocks, dense foam, no die | ±0.4 mm | None | Prototypes, thick parts |
| Laser cutting | Thin sheets, fine detail, no contact | ±0.2 mm | None | Thin parts, small runs |
| Hot press molding | Deep 3D shapes, consistent repeatability | ±0.8 mm | Mold | no minimum |
| Lamination + die cut | Thick inserts from thin sheets, two-tone | ±0.3 mm | Low (die) | no minimum |
Detailed process pages: die cutting, CNC routing, water jet cutting, lamination, molding and thermoforming.
Capability table
| Parameter | Capability |
|---|---|
| Material | Closed-cell EVA foam (ethylene-vinyl acetate), 38°–80° Shore C equivalent densities |
| Density range | 38 kg/m³ to 250 kg/m³ (soft cushion to rigid structural) |
| Sheet size | Up to 2000 × 1000 mm standard; larger by lamination |
| Thickness range | 1 mm to 100 mm (single sheet or laminated) |
| Cutting tolerance | ±0.3 mm die-cut, ±0.5 mm CNC, ±0.2 mm laser |
| Cavity depth | Up to 90 mm by CNC; deeper by lamination |
| Wall thickness between cavities | Minimum 1.5 mm recommended, 1.0 mm achievable |
| Corner radius | Minimum 0.5 mm inner radius for die cutting |
| Colour | Black, white, grey, red, blue, yellow, green, orange, pink, custom Pantone match |
| Surface | Smooth skin, matte, embossed texture, flocked (velvet) finish |
| Functional options | Anti-static / ESD, conductive, flame retardant (UL94 HB / V-0), waterproof, adhesive backing |
| Branding | Laser engraving, CNC engraving, silk-screen printing, debossing, woven or PVC label |
| MOQ | 1 piece minimum; no quantity limit |
| Sample lead time | 5–7 days |
| Mass production lead time | 15–25 days depending on quantity and process |
| Annual capacity | Over 8 million insert pieces across 16 lines |
Finishes, colours and branding
- Smooth skin — the standard EVA surface, non-scuff and easy to clean; best for product contact.
- Embossed texture — leather-grain, diamond or custom texture pressed into the skin for a premium feel.
- Flocked (velvet) finish — a short-nap surface bonded to the foam, commonly used in jewellery and cosmetic inserts.
- Two-tone lamination — contrasting top and core layers, so the cavity edge shows a different colour from the land.
- Adhesive backing — 3M or domestic pressure-sensitive adhesive, with release liner, for inserts that must stay fixed in the box.
- Logo branding — laser engraving for fine detail, CNC engraving for depth, silk-screen for flat colour, or a label patch.
Applications we produce inserts for
Quality, testing and certifications
Inserts are checked at four points: incoming foam density and thickness, first-article cavity dimensions, in-process cutting and lamination, and final AQL sampling. We keep a first-article report and a capability study for repeat orders on request.
| Property | Method / standard | Typical acceptance |
|---|---|---|
| Density | ISO 845 | Within ±10% of nominal |
| Hardness | ASTM D2240 (Shore C) | ±5 Shore |
| Compression set | ASTM D3574 | ≤ 15% after 22 h at 70°C |
| Tensile strength / elongation | ASTM D3574 | Per material datasheet |
| Flammability | UL94 HB / V-0, FMVSS 302 | On request, certified stock |
| Surface resistivity (ESD grades) | IEC 61340-5-1 | 10^6–10^9 Ω dissipative, 10^3–10^5 Ω conductive |
| Restricted substances | RoHS, REACH SVHC | Full material declaration |
How to source custom EVA foam inserts from us
Request a quote with your product dimensions or a drawing and we reply within 12 business hours with a price, a DFM note and a sample plan. Samples ship in 5–7 days; mass production runs 15–25 days. We accept T/T, PayPal, Alibaba Trade Assurance and L/C for large orders, on EXW or FOB terms; prices exclude shipping and the buyer pays freight.
See MOQ and pricing, free samples, OEM & ODM and factory and equipment.
Get a quote and a sample for your project
Send us the dimensions, a drawing or the physical part. You will get a written DFM review, a unit price and a sample plan within 12 business hours.
All 14 products in this category
Carved, die-cut and press-formed inserts with part-specific cavities, drawn from the same 46 catalogue items we quote every day.
14 products
CNC-Carved Anti-Static EVA Foam Tool Box Insert
A one-piece, CNC-routed EVA insert that holds tools and instruments in defined cavities.
View product →
Custom-Cut EVA Foam Insert for Tool & Instrument Cases
An EVA insert cut to your case dimensions and thickness, with anti-static cushioning for tools, instruments and equipment.
View product →
EVA Foam Insert for Electronics Packaging
A carved EVA insert for electronics packaging that holds devices and accessories in place.
View product →
Carved ESD EVA Foam Insert for Tools & Tea Sets
An anti-static EVA insert carved to fit tools, teaware and glassware.
View product →
Custom Anti-Static EVA Foam Insert for Toolboxes & Glassware
A made-to-order EVA insert with CNC-carved cavities for tools, teaware and glassware.
View product →
Custom Die-Cut Anti-Static EVA Foam Insert
An anti-static EVA insert cut to any specified shape, size and thickness — from a simple flat gasket to an irregular multi-level carved cavity.
View product →
High-Density Anti-Static EVA Foam Insert
A soft 15 Shore C anti-static EVA insert formed by wire cutting, made for bag and case padding where delicate contents need gentle, charge-safe support.
View product →
CNC-Routed One-Piece EVA Gift Box Insert
A dense 70 kg/m³ EVA insert routed from a single block into a one-piece tray, built for gift boxes and tool boxes that need a rigid, well-defined cavity layout.
View product →
Laminated EVA Foam Insert for Handicrafts & Gift Boxes
A laminated EVA insert with a wide −50 to 80 °C operating range, chosen for handicraft and gift packaging that needs both cushioning and sound damping.
View product →
Anti-Static Black EVA Shaped Insert for Tool Cases
A black anti-static EVA insert carved to irregular shapes for tool boxes and instrument cases, dissipating charge while holding each item in a defined pocket.
View product →
Custom EVA Foam Insert for Electronics Packaging
A made-to-size EVA foam insert for electronic products, cut to any thickness and size to absorb shock and resist moisture in transit and storage.
View product →
Coloured 38° EVA Foam Sheet for Cosmetic & Bottle Inserts
A multi-colour, eco-friendly EVA sheet for cosmetic inner trays and wine bottle shock liners, with 38/45/60° hardness options and a wide operating temperature range.
View product →
CNC-Carved One-Piece EVA Foam Insert
A single block of EVA carved by CNC into a custom cavity for premium gift boxes and protective packaging, with 38–70 kg/m³ density and flame-retardant options.
View product →
Black EVA Tool & Instrument Case Insert
A black EVA foam pad for tool and instrument cases, carved to the shape of the contents and available with anti-static performance for sensitive equipment.
View product →Frequently asked questions
What is the minimum order quantity for custom EVA foam inserts?
How long does a custom EVA foam insert sample take?
What information do I need to provide for a quote?
Can you match a specific Pantone colour?
Do you produce anti-static or conductive EVA foam inserts?
Can the insert be fixed inside the box?
What tolerances can you hold on insert cavities?
Do you ship to the United States?
What should buyers check when specifying EVA foam packaging supplier?
What should buyers check when specifying EVA foam insert manufacturer wholesale?
What should buyers check when specifying EVA foam packaging inserts factory direct?
Buyer specification checklist
What should I specify for the insert?
The core inputs are product size, weight, cavity depth, density, thickness and tolerance. EvaForm uses these six values to select the EVA grade and cutting route.
Which conversion process fits my part?
Die cutting is the most economical route for high-volume flat inserts. CNC routing suits multi-level cavities; molding fits deep 3D shapes.
What happens after I send a drawing?
You receive a DFM note, price and sample plan within one business day. Include quantity, colour or finish, destination port and target date.
Which standards guide the material choices?
EVA foam packaging is normally specified against ISO 9001 quality control, RoHS/REACH material compliance and UL 94 flammability classifications. These references help buyers compare suppliers on evidence rather than claims.
“Specify density, hardness and tolerance before discussing price; the rest is process selection.” — EvaForm Engineering Checklist
- ISO 9001 — quality management systems (2026 edition published 16 Sep 2026)
- EU REACH — chemical compliance
- RoHS Directive 2011/65/EU — restricted substances
- UL 94 — flammability classification