Skip to content
EvaForm

EVA Foam Inserts for Glassware and Bottles

Glass fails from point impact and from vibration over time. We design glassware inserts in high-density EVA (120–180 kg/m³) that support the strongest structural points of the vessel — the base, the shoulder, the stem — while keeping contact pressure low across the whole surface.

Design principles for glass

  • Support the base and shoulder, not the rim; the rim is the weakest point and should never take a load.
  • Full-height cavities so the vessel cannot tilt and knock against the cavity wall.
  • Minimum 10 mm foam between adjacent cavities to stop bottle-to-bottle contact.
  • Land height above the rim so the lid or closure is not compressed.
  • High density at the base — the base takes the drop load, so density there matters most.
  • Consider the secondary pack — corrugated dividers or a sleeve can reduce the foam thickness needed.
Glassware insert specification
ParameterRecommendation
MaterialEVA foam 120–180 kg/m³
Cavity depthFull vessel height minus 2–5 mm, with a finger notch
Wall between cavities≥ 10 mm, 15 mm for stemware
Thickness40–80 mm depending on vessel size
ProcessCNC routing for prototypes and mixed sets; die cutting for single-SKU shippers
Adhesive backingRecommended for shipper inserts to stop movement in the carton
ValidationDrop test to ISTA 1A or 2A on request

Configurations we produce

Single-bottle shipper One bottle in a corrugated shipper with a fitted EVA base and neck support.
Multi-bottle gift set 3, 4, 6 or 12 bottle configurations with dividers.
Stemware inserts Bowl and stem support with a wide land between glasses.
Jar and canning inserts Straight-wall cavities for jars, honey and preserves.
Decanter nests Contoured CNC cavities for irregular decanter shapes.
Laboratory glass Flask and beaker trays with chemical-resistant grades.
Start a project

Get a quote and a sample for your project

Send us the dimensions, a drawing or the physical part. You will get a written DFM review, a unit price and a sample plan within 12 business hours.

Or email sales@eva-form.com · MOQ from 1 piece · sample in 5–7 days · mass production 15–25 days

Frequently asked questions

Can EVA foam protect a wine bottle in shipping?
Yes — a fitted base and neck support in 120–180 kg/m³ EVA, inside a single-bottle corrugated shipper, is the standard solution and can be validated with an ISTA drop test.
What density is best for glassware?
120–180 kg/m³. Below that the cavity can bottom out on a drop and transfer the load straight to the glass.
Can you make a stemware insert?
Yes. Stemware needs a wider land (≥15 mm) between cavities and support at the bowl and foot rather than the stem.
Do you do drop testing?
Yes, we can arrange ISTA 1A or 2A drop testing and provide the report with video evidence before you commit to production.
What should buyers check when specifying EVA foam for glass products?
For EVA foam for glass products, confirm density, thickness, tolerance, colour/finish and MOQ before a trial order. EvaForm makes custom EVA foam packaging to drawing or sample, with MOQ 1 piece and samples in 5–7 days.

Buyer specification checklist

What should I specify for the insert?

The core inputs are product size, weight, cavity depth, density, thickness and tolerance. EvaForm uses these six values to select the EVA grade and cutting route.

Which conversion process fits my part?

Die cutting is the most economical route for high-volume flat inserts. CNC routing suits multi-level cavities; molding fits deep 3D shapes.

What happens after I send a drawing?

You receive a DFM note, price and sample plan within one business day. Include quantity, colour or finish, destination port and target date.

Which standards guide the material choices?

EVA foam packaging is normally specified against ISO 9001 quality control, RoHS/REACH material compliance and UL 94 flammability classifications. These references help buyers compare suppliers on evidence rather than claims.

“Specify density, hardness and tolerance before discussing price; the rest is process selection.” — EvaForm Engineering Checklist