Skip to content
EvaForm

Foam Lamination: Multi-Layer Thickness and Two-Tone Colour

Lamination bonds two or more foam layers into a single part. It lets us build thickness beyond what a single sheet can provide, create a contrasting colour edge, add a flocked top surface, or apply an adhesive backing.

What lamination is used for

  • Building thickness up to about 120 mm from thinner, cheaper sheets.
  • Two-tone inserts: a coloured top layer over a black core, so the cavity edge shows colour.
  • Adding a flocked (velvet) top surface to a structural EVA core.
  • Applying pressure-sensitive adhesive with a release liner.
  • Combining materials: a soft contact layer over a firm structural layer.

Adhesive options

Lamination adhesives
AdhesiveBehaviourBest for
Solvent-based polyurethaneStrong, durable, slight odour during processingStructural laminations, inserts
Hot meltFast, clean, good for thin layersHigh-volume two-tone parts
Water-basedLow odour, lower heat resistanceCosmetic and medical-adjacent parts
Pressure-sensitive (PSA)Tacky, needs a linerAdhesive-backed inserts and gaskets

Design rules

  • Keep layer thicknesses in a sensible ratio; very thin layers over a very thick core can telegraph.
  • For two-tone parts, a 1–3 mm top layer is enough to show the edge colour.
  • Adhesive-backed parts are laminated first, then die-cut or routed, then kiss-cut to the liner.
  • If the part will be washed or exposed to solvent, specify the adhesive up front.
Start a project

Get a quote and a sample for your project

Send us the dimensions, a drawing or the physical part. You will get a written DFM review, a unit price and a sample plan within 12 business hours.

Or email sales@eva-form.com · MOQ from 1 piece · sample in 5–7 days · mass production 15–25 days

Frequently asked questions

Can foam be laminated?
Yes — lamination is a standard process for building thickness, two-tone colour, flocked surfaces and adhesive backing.
How thick can a laminated insert be?
Up to about 120 mm, built from multiple layers.
Will the layers separate?
Not when the correct adhesive is used. We test peel strength on the first article.
Can you make a two-tone insert?
Yes — a coloured top layer laminated to a contrasting core shows the colour on every cavity edge.
Can you apply adhesive backing?
Yes, pressure-sensitive adhesive with a release liner, one or both sides.

Buyer specification checklist

What should I specify for the insert?

The core inputs are product size, weight, cavity depth, density, thickness and tolerance. EvaForm uses these six values to select the EVA grade and cutting route.

Which conversion process fits my part?

Die cutting is the most economical route for high-volume flat inserts. CNC routing suits multi-level cavities; molding fits deep 3D shapes.

What happens after I send a drawing?

You receive a DFM note, price and sample plan within one business day. Include quantity, colour or finish, destination port and target date.

Which standards guide the material choices?

EVA foam packaging is normally specified against ISO 9001 quality control, RoHS/REACH material compliance and UL 94 flammability classifications. These references help buyers compare suppliers on evidence rather than claims.

“Specify density, hardness and tolerance before discussing price; the rest is process selection.” — EvaForm Engineering Checklist