Skip to content
EvaForm
Products / Protective Components

EVA Foam Pads & Gaskets

Small EVA parts that do big jobs: anti-slip feet, sealing gaskets and corner protection with verified compressive strength.

Black die-cut EVA foam pads and nested protective pieces
Black die-cut EVA parts with nested profiles for protection and cushioning.

We die cut EVA foam pads, gaskets and corner guards in black EVA to any size. Corner guards are tested to 800 N and 1000 N compressive strength and supplied as L-profile, U-profile or one-piece molded sections for furniture, glass and door protection.

Product description

Pads and gaskets are the small components that decide whether a product feels finished. A self-adhesive EVA foot stops a device sliding on a desk, isolates vibration and prevents the housing from being scratched; an EVA gasket closes the gap around a lid or panel so dust and moisture cannot enter; a corner guard takes the impact that would otherwise chip glass or damage a furniture edge. We die cut these parts from EVA foam in black as standard, with white available on some profiles, and accept dimensions of any size to drawing. Round self-adhesive feet are one of our highest-volume items and are used in electronics, appliances and furniture. For structural edge protection we produce L-profile, U-profile and one-piece molded corner guards with a tested compressive strength of 800 N or 1000 N depending on section; the heavier section is specified for storage and shipping protection of glass, doors and furniture. Standard corner-guard sections include 800 × 80 × 6 mm, 800 × 80 × 8 mm, 800 × 90 × 10 mm and 800 × 100 × 8 mm, while smaller L-sections such as 50 × 50 × 25 × 15 mm and 100 × 100 × 100 × 20 mm are used on furniture and appliances. All parts can be printed or logo-marked, and adhesive backing is available on pads and gaskets. Manufacturing is in Dongguan, Guangdong, China. The standard MOQ is 1 piece and samples are ready in 5–7 days.

Technical specifications

EVA pads and gasket parameters (from production data)
ParameterSpecification
MaterialEVA foam (EVA)
ColourBlack standard; white available on corner profiles
SizeAll sizes custom; die cut to drawing
Compressive strength800 N and 1000 N grades
Product typesRound self-adhesive pads; L-profile, U-profile and one-piece corner guards
ApplicationsFurniture, glass, doors, storage protection, electronics and appliances
AdhesiveSelf-adhesive backing available on pads and gaskets
Printing / logoAvailable
Item numbersRound EVA pad; EVA corner guard
Custom processingYes — size, shape, thickness and adhesive to specification
OriginDongguan, Guangdong, China
BrandWenhong
MOQ1 piece standard

Standard parts

Listed pad and corner-guard configurations with unit weights
SpecificationMaterial / colourListed unit weight
Round self-adhesive pad, custom diameterEVA / blackBy size
L-profile 50 × 50 × 25 × 15 mmEVA / black or white100 g
L-profile 100 × 100 × 100 × 20 mmEVA / black or white100 g
Corner guard 800 × 80 × 6 mm, 6 mm thickRubber / standard100 g
Corner guard 800 × 90 × 10 mm, 10 mm thickRubber / standard100 g

Applications and features

Furniture Anti-slip feet and corner guards that protect floors, panels and painted edges.
Glass & doors High-strength L and U profiles that absorb edge impacts in transit.
Electronics Round self-adhesive pads that stop vibration and prevent housing scuffs.
Appliances Gaskets and mounting pads that close gaps and dampen operational noise.
Storage & shipping One-piece molded corner protection for stacked or palletised goods.
Custom shapes Die-cut gaskets and seals to any drawing, with adhesive backing if required.

Ordering and customisation

  • Drawing: send a DXF, PDF or physical sample; we confirm die layout and material grade.
  • Strength: choose 800 N or 1000 N corner-guard grade based on the impact you must absorb.
  • Profiles: L-profile, U-profile and one-piece molded corner guards, or flat die-cut pads.
  • Adhesive: self-adhesive backing on feet, gaskets and flat pads.
  • Marking: printing and customer logos available on all parts.
  • Lead time: samples in 5–7 days, production in 15–25 days.
Kraft-brown foam component box with dividers and protective inserts
Kraft-tone foam parts packed in a divided component box.
Start a project

Get a quote and a sample for your project

Send us the dimensions, a drawing or the physical part. You will get a written DFM review, a unit price and a sample plan within 12 business hours.

Or email sales@eva-form.com · MOQ from 1 piece · sample in 5–7 days · mass production 15–25 days

All 5 products in this category

Die-cut pads, foot pads, gaskets, corner protectors and press-moulded protective gear — small parts that do a specific mechanical job.

5 products

Frequently asked questions

What is the minimum order quantity?
Our minimum order is 1 piece per design, with no quantity limit. For stock sheet, roll and tape formats we can often start from one roll or one master carton — tell us the size and we will confirm.
What are the lead times for samples and production?
Samples are ready in 5–7 days, including CNC or die-cut tooling for most designs. Mass production takes 15–25 days after sample approval, depending on quantity and finish.
What compressive strength do the corner guards have?
We produce 800 N and 1000 N grades. The 1000 N section is recommended for glass, doors and furniture in shipping; the 800 N section suits lighter internal protection.
Can you make pads in our exact diameter and thickness?
Yes. Round self-adhesive pads are made to any size to drawing. Tell us the diameter, thickness, foam density and whether you need adhesive backing.
Which corner profile should I choose?
L-profile guards cover two faces and are the most common. U-profile guards wrap three edges for heavier items, and one-piece molded guards give the cleanest appearance for finished furniture.
Do the pads and gaskets have adhesive backing?
Yes. Self-adhesive backing is available on pads and gaskets so they can be applied directly during assembly. Confirm the surface material and we will recommend the adhesive.

Buyer specification checklist

What should I specify for the insert?

The core inputs are product size, weight, cavity depth, density, thickness and tolerance. EvaForm uses these six values to select the EVA grade and cutting route.

Which conversion process fits my part?

Die cutting is the most economical route for high-volume flat inserts. CNC routing suits multi-level cavities; molding fits deep 3D shapes.

What happens after I send a drawing?

You receive a DFM note, price and sample plan within one business day. Include quantity, colour or finish, destination port and target date.

Which standards guide the material choices?

EVA foam packaging is normally specified against ISO 9001 quality control, RoHS/REACH material compliance and UL 94 flammability classifications. These references help buyers compare suppliers on evidence rather than claims.

“Specify density, hardness and tolerance before discussing price; the rest is process selection.” — EvaForm Engineering Checklist