Custom EVA Foam Inserts
A formed cavity, cut to your product and its accessories, that stops movement in transit and presents the item correctly when the box is opened.
We manufacture custom EVA foam inserts for electronics, precision instruments, cosmetic gift boxes and tool cases. Cavities are cut from 38 kg/m³ EVA as standard, with a full 18–300 kg/m³ density range and thicknesses from 0.5 to 60 mm, so a lightweight Presentation insert and a heavy instrument cradle can both be produced on the same line.
Product description
A packaging insert has to do two jobs that pull in opposite directions: hold the product rigidly enough that it cannot migrate inside the carton, and cushion it softly enough that a drop does not transmit a damaging peak acceleration to the housing. EVA foam does both because it is a closed-cell, cross-linked material with a smooth, non-abrasive skin and a predictable compression curve. We start from your product — its dimensions, weight, fragility and the list of accessories that must travel with it — and build a cavity layout around it. Standard stock is 38 kg/m³ EVA in black, white or mixed colours; where a product is heavy or sharp-edged we move to 45, 60 or 70 kg/m³ material so the cavity walls do not compress under load. Thickness runs from 0.5 mm for a thin protective layer to 60 mm for a deep multi-level insert. For prototypes and short runs we CNC route the cavities, which needs no steel tooling and holds ±0.5 mm. For volumes above a few thousand pieces we cut a steel-rule die, which holds ±0.3 mm and brings the unit cost down sharply. We can laminate a short-nap flocked surface for gift packaging, add a two-tone core so the cavity edge carries a second colour, print or laser-engrave a logo, and add finger notches so the product lifts out cleanly. Every insert is sampled and fit-checked against your actual product before production starts, and we can supply drop-test results and RoHS / REACH declarations with the quotation. Manufacturing is in Dongguan, Guangdong, China; the standard MOQ is 1 piece and samples ship in 5–7 days.
Technical specifications
| Parameter | Specification |
|---|---|
| Material | EVA foam, cross-linked closed-cell |
| Density | 38 kg/m³ standard; 18–300 kg/m³ available on request |
| Hardness | 38–80 Shore C depending on grade |
| Thickness | 0.5–60 mm; custom thickness accepted |
| Colour | Black, white or mixed colours, compounded through the foam |
| Sheet / block size | Multi-size custom; assorted colours, black and white |
| Item number | WH-169 (also EVA insert / EVA engraved series) |
| Converting process | CNC routing, die cutting, stamping or wire cutting |
| Printing / logo | Available — silk screen, laser engraving or printed label |
| Origin | Dongguan, Guangdong, China |
| Brand | Wenhong (EvaForm export brand) |
| MOQ | 1 piece minimum; no quantity limit |
Typical configurations
| Configuration | Colour | Listed unit weight |
|---|---|---|
| Assorted-colour insert | Mixed colours | 10 g |
| Black EVA insert | Black | 10 g |
| White EVA insert | White | 10 g |
| Custom multi-cavity insert | Black / white / colour | By drawing |
Where these inserts are used
Ordering and customisation
- Artwork accepted: DXF, DWG, AI or PDF, or simply send a physical sample for scanning.
- Tooling: no charge for CNC-routed prototypes; a one-off steel die is quoted for volume runs.
- Finishes: smooth skin, short-nap flocking, two-tone lamination, silk screen or laser engraving.
- Density choice: 38 kg/m³ for general packaging, 45–70 kg/m³ for heavy or sharp products.
- Tolerance: ±0.5 mm CNC, ±0.3 mm die-cut, confirmed on the approved sample.
- Packaging: bulk in cartons or individually polybagged to your specification.
Get a quote and a sample for your project
Send us the dimensions, a drawing or the physical part. You will get a written DFM review, a unit price and a sample plan within 12 business hours.
All 14 products in this category
Carved, die-cut and press-formed inserts with part-specific cavities, drawn from the same 46 catalogue items we quote every day.
14 products
CNC-Carved Anti-Static EVA Foam Tool Box Insert
A one-piece, CNC-routed EVA insert that holds tools and instruments in defined cavities.
View product →
Custom-Cut EVA Foam Insert for Tool & Instrument Cases
An EVA insert cut to your case dimensions and thickness, with anti-static cushioning for tools, instruments and equipment.
View product →
EVA Foam Insert for Electronics Packaging
A carved EVA insert for electronics packaging that holds devices and accessories in place.
View product →
Carved ESD EVA Foam Insert for Tools & Tea Sets
An anti-static EVA insert carved to fit tools, teaware and glassware.
View product →
Custom Anti-Static EVA Foam Insert for Toolboxes & Glassware
A made-to-order EVA insert with CNC-carved cavities for tools, teaware and glassware.
View product →
Custom Die-Cut Anti-Static EVA Foam Insert
An anti-static EVA insert cut to any specified shape, size and thickness — from a simple flat gasket to an irregular multi-level carved cavity.
View product →
High-Density Anti-Static EVA Foam Insert
A soft 15 Shore C anti-static EVA insert formed by wire cutting, made for bag and case padding where delicate contents need gentle, charge-safe support.
View product →
CNC-Routed One-Piece EVA Gift Box Insert
A dense 70 kg/m³ EVA insert routed from a single block into a one-piece tray, built for gift boxes and tool boxes that need a rigid, well-defined cavity layout.
View product →
Laminated EVA Foam Insert for Handicrafts & Gift Boxes
A laminated EVA insert with a wide −50 to 80 °C operating range, chosen for handicraft and gift packaging that needs both cushioning and sound damping.
View product →
Anti-Static Black EVA Shaped Insert for Tool Cases
A black anti-static EVA insert carved to irregular shapes for tool boxes and instrument cases, dissipating charge while holding each item in a defined pocket.
View product →
Custom EVA Foam Insert for Electronics Packaging
A made-to-size EVA foam insert for electronic products, cut to any thickness and size to absorb shock and resist moisture in transit and storage.
View product →
Coloured 38° EVA Foam Sheet for Cosmetic & Bottle Inserts
A multi-colour, eco-friendly EVA sheet for cosmetic inner trays and wine bottle shock liners, with 38/45/60° hardness options and a wide operating temperature range.
View product →
CNC-Carved One-Piece EVA Foam Insert
A single block of EVA carved by CNC into a custom cavity for premium gift boxes and protective packaging, with 38–70 kg/m³ density and flame-retardant options.
View product →
Black EVA Tool & Instrument Case Insert
A black EVA foam pad for tool and instrument cases, carved to the shape of the contents and available with anti-static performance for sensitive equipment.
View product →Frequently asked questions
What is the minimum order quantity?
What are the lead times for samples and production?
Can you make the product to our drawing or sample?
Can you make an insert for a product plus all its accessories?
What density should I choose for a heavy product?
Do you supply anti-static or flame-retardant inserts?
What should buyers check when specifying EVA foam insert tray?
Buyer specification checklist
What should I specify for the insert?
The core inputs are product size, weight, cavity depth, density, thickness and tolerance. EvaForm uses these six values to select the EVA grade and cutting route.
Which conversion process fits my part?
Die cutting is the most economical route for high-volume flat inserts. CNC routing suits multi-level cavities; molding fits deep 3D shapes.
What happens after I send a drawing?
You receive a DFM note, price and sample plan within one business day. Include quantity, colour or finish, destination port and target date.
Which standards guide the material choices?
EVA foam packaging is normally specified against ISO 9001 quality control, RoHS/REACH material compliance and UL 94 flammability classifications. These references help buyers compare suppliers on evidence rather than claims.
“Specify density, hardness and tolerance before discussing price; the rest is process selection.” — EvaForm Engineering Checklist
- ISO 9001 — quality management systems (2026 edition published 16 Sep 2026)
- EU REACH — chemical compliance
- RoHS Directive 2011/65/EU — restricted substances
- UL 94 — flammability classification