Skip to content
EvaForm

CNC Foam Cutting: Multi-Level EVA Inserts Without Tooling

CNC routing cuts EVA foam with a rotating tool on a gantry, so a part can have stepped depths, contoured pockets and raised lands in a single setup. There is no die, which makes it the right process for prototypes, mixed kits and medium volumes.

What CNC routing is good at

  • Multi-level cavities with different depths in one insert.
  • Contoured pockets that follow an irregular product shape.
  • Raised lands and ribs that support a product at specific points.
  • Prototype and first-article parts in 5–7 days with no tooling.
  • Tolerances of ±0.5 mm.
  • Any quantity from one piece upward.

Design rules

  • Minimum wall between cavities 1.5 mm; 2 mm is more robust.
  • Minimum inner corner radius equals the tool radius (typically 3–6 mm); use a larger radius for dense foam.
  • Cavity depth up to about 90 mm in one block; deeper by lamination.
  • Avoid very thin, tall ribs — they can deflect and break.
  • Specify a draft angle (1–2°) on deep cavities to ease removal of the part and the product.

Finishing after routing

Routed edges can be left as cut, trimmed, sanded or flocked. Laser engraving can add part numbers and logos directly to the land. Adhesive backing is applied after routing so the adhesive does not contaminate the cutter.

Start a project

Get a quote and a sample for your project

Send us the dimensions, a drawing or the physical part. You will get a written DFM review, a unit price and a sample plan within 12 business hours.

Or email sales@eva-form.com · MOQ from 1 piece · sample in 5–7 days · mass production 15–25 days

Frequently asked questions

Can you CNC cut foam?
Yes — CNC routing is one of our core processes for multi-level and contoured EVA inserts.
What tolerance can CNC hold on foam?
±0.5 mm. Tighter tolerances need a different process or material, and we will say so up front.
How deep a cavity can you route?
Up to about 90 mm in a single block; deeper cavities are built by laminating layers.
Is CNC cheaper than die cutting?
For short runs, usually yes. At larger volumes, die cutting tends to win on unit cost.
Can you make a prototype insert quickly?
Yes, CNC prototypes typically ship in 5–7 days with no tooling.

Buyer specification checklist

What should I specify for the insert?

The core inputs are product size, weight, cavity depth, density, thickness and tolerance. EvaForm uses these six values to select the EVA grade and cutting route.

Which conversion process fits my part?

Die cutting is the most economical route for high-volume flat inserts. CNC routing suits multi-level cavities; molding fits deep 3D shapes.

What happens after I send a drawing?

You receive a DFM note, price and sample plan within one business day. Include quantity, colour or finish, destination port and target date.

Which standards guide the material choices?

EVA foam packaging is normally specified against ISO 9001 quality control, RoHS/REACH material compliance and UL 94 flammability classifications. These references help buyers compare suppliers on evidence rather than claims.

“Specify density, hardness and tolerance before discussing price; the rest is process selection.” — EvaForm Engineering Checklist